Autoquip TITAN SCISSOR LIFT TABLE - Manual (Page 8)

8
3. SAFETY
3.1 Safety Signal Words
This Owner’s Manual covers Titan Lift models produced by Autoquip. Before installing, operating or
servicing lift, you must read, understand and follow the instructions and safety warnings in this manual.
Your lift may not be equipped with some optional equipment shown in this manual.
The safety information in this manual is denoted by the safety alert symbol:
^
The level of risk is indicated by the following signal words.
DANGER – Indicates a hazardous situation, which, if not avoided, will
result in death or serious injury.
WARNING – Indicates a hazardous situation, which, if not avoided, could
result in death or serious injury.
CAUTION – Indicates a hazardous situation, which, if not avoided, could
result in minor or moderate injury.
NOTICE – Indicates a situation that could result in damage to the lift or
other property.
3.2 Installation
Do not install lift in a pit unless pit has a bevel toe guard or
other approved toe protection. A shear point can exist which
can cause severe foot injury.
Lift platforms traveling below floor levels may create a toe hazard as load
passes top edge of pit. This may require guarding in accordance with
Federal Regulations. Guarding must be installed prior to operating lift.
^ DANGER
^ WARNING
^ CAUTION
NOTICE
^ WARNING