Introduction and warranty, 1 introduction, 1 identification – Autoquip TITAN SCISSOR LIFT TABLE User Manual

Page 3: 2 inspection, 3 planned maintenance program, 2 responsibility of owners/users, 1 deflection, Introduction, Identification, Inspection

1. INTRODUCTION AND WARRANTY

1.1 Introduction

Please read and understand this manual prior to installation or operation of this lift. Failure to do so
could lead to property damage and/or serious personal injury. If you have any questions, call a local
dealer or Autoquip Corporation at 1-888-811-9876 or 405-282-5200.

Please record the following information and refer to it when calling your dealer or Autoquip.

Model Number:________________Serial Number: ___________________

Installation Date _____/_____/_____

1.1.1 Identification

When ordering parts or requesting information or service on this lift, PLEASE REFER TO THE MODEL
AND SERIAL NUMBER. This information is on a nameplate attached to the leg assembly.
Replacement parts are available from a local Autoquip distributor.

1.1.2 Inspection

Upon receipt of lift, perform a visual inspection to determine whether the lift has been damaged in
transit. Any damage found must be noted on delivery receipt. In addition to this preliminary inspection,
carefully inspect lift for concealed damage. Any concealed damage found that was not noted on
delivery receipt must be reported in writing to the delivering carrier within 48 hours.

Use the following checklist for inspection of lift:

1. Examine entire unit for any signs of mishandling. Carefully check power unit and controls.

2. Thoroughly examine all connections, making sure they have not vibrated loose during transit, and

inspect wiring for any signs of damage.

3. After installation, raise lift and inspect base frame, platform, scissors assembly, and cylinder

plumbing connections.

1.1.3 Planned Maintenance Program

A local Autoquip representative provides a Planned Maintenance Program (PMP) for this equipment
using factory-trained personnel. Call a local representative or Autoquip Corporation at 1-888-811-9876
or 405-282-5200 for more information.

1.2 Responsibility Of Owners/Users

1.2.1 Deflection

It is the responsibility of user/purchaser to advise manufacturer where deflection may be critical to the
application.