APG PG7 user manual User Manual
Page 14
PG7
Rev. A, 12/09
14
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Sample Rate (SAMPLE):
Adjusts the rate at which the gauge takes sample readings.
NOTE: Setting the Sample Rate to “SLOW” will help preserve battery life
(when applicable) and will also help to smooth rapidly fluctuating
readings.
Options: SLOW (4x/second), MEdIUM (8x/second), FAST (16x/second)
Setting the Sample Rate feature
:
Step 1: Press the On/Off button to enter the main setup menu.
Step 2: Press (Z) to cycle through the options until AdVSET is displayed.
Step 3: Press (S) to access the Advanced Settings menu.
Step 4: Press (Z) to cycle through the options until SAMPLE is displayed.
Step 5: Press (S) to access the Sample Rate setting options.
Step 6: Press (Z) to cycle through the setting options until the desired setting
is displayed.
Step 7: Press (S) to apply the displayed setting and return to advanced setup
menu.
Step 8: To exit the advanced setup menu, press (Z) until EXIT is displayed and
press (S) to exit to the main setup menu.