Anchor FIESTA FRAME TENT HIGH PEAK - Manual (Page 3)

When all of the uprights are raised, attach the
snap of the tension straps to the d-rings on the
fabric at each upright.
At corners, run strap on left side of corner thru the
left d-ring and then thru the right d-ring. Run strap
on right side thru left d-ring only.
Snap tension strap thru both rings at bottoms of
straps.
Insert the hook of the tension strap into the upright
tension connector just above the base plate.
Starting with the corners, tight-
en the tension strap using the
ratchet. Do not over-tension
as this may create unsightly
wrinkles or puckering in your
tent fabric.
Watch peak during tensioning
to be sure it stays vertical.
Note: When tensioning tents
with tension points at valley,
tension those points last.
Step 3 - Tensioning Fabric
Continue as noted in the standard Fiesta instruc-
tions.