Allen&Heath iLive OneMix - Manual (Page 5)

Allen & Heath iLive OneMix app Guide issue 1 5
Setting up OneMix:
Open the
Setup view.
Assigning strips - Touch and drag items from the top into the lower window
to assign the strip layout. Drop the item over an existing strip to insert before
it. Drag and hold the item beyond the right side of the window to scroll and
assign it at the end of a full window. Blank spaces can be inserted between
channels.
‘My Mix’ layer settings - The chosen Aux master must be assigned to this
layer. Only one Aux can be assigned. The Aux master cannot be assigned
to any other layer. To change the Aux first remove it by dragging it out of the
layer. Other channels can also be assigned to this layer if required, for
example ‘mic split’ channels of the musician’s vocal and instrument. Up to 8
strips may be assigned to the ‘My Mix’ layer. The layer name cannot be
changed. Touch the Setup tool on the right of the ‘My Mix’ layer to open its
settings page. Touch the OneMix Name button to apply a session name with
up to 8 characters, for example the name of the musician. This name
appears at top left of the screen at all times. Touch the Channel Processing
buttons to enable or disable a combination of Gate, PEQ, GEQ and
Compressor for mix and channels assigned to the ‘My Mix’ layer. Mute and
Limiter are always available on this layer. Touch the Reset button to clear the
strip assignments for the layer.