Allen&Heath iLive OneMix - Manual (Page 4)

Allen & Heath iLive OneMix app Guide issue 1 4
CH view - provides access to the EQ and dynamics processing enabled for
the user. OneMix starts in the CH view showing the ‘My Mix’ layer in the
lower window and the Aux master first available processing tab open in the
upper window (Limiter if none enabled). Touch the tabs on the right to
navigate available layers. Tap a channel name to open its processing (if
enabled). If processing is disabled the upper window will be blank. Touch
and drag the buttons and curves to adjust the processing. The name of the
currently selected channel is displayed in the top right
CH box.
MIX view - provides access to faders in both windows. Channel signal
meters are displayed within the faders. Touch the tabs on the right to
navigate available layers. Touch and drag a fader to adjust its level, or pan to
adjust position within a stereo Aux mix. Touch and move your finger away
from the fader or pan while dragging to increase resolution. The name of the
assigned Aux mix is always displayed in the top right
MIX box.