Allen&Heath iLive OneMix - Manual (Page 2)

Allen & Heath iLive OneMix app Guide issue 1 2
Requirements:
iPad with iOS5 or higher. Any iLive MixRack running firmware version V1.90
or higher, and with a suitable Wi-Fi router (wireless access point) connected
to one of the iLive NETWORK ports. The iLive firmware version maintenance
number does not need to be identical to the OneMix version, for example
OneMix V1.90 will run on iLive V1.91.
The number of OneMix sessions that can be connected depends on which
other control devices are connected. iLive can support up to 16
‘connections:
---- iLive Surface = 2 connections
---- Laptop Editor = 1 connection
---- iPad MixPad = 1 connection
---- iPad OneMix = 1 connection
---- iPhone Tweak = 1 connection
Connecting multiple iPads puts a heavy demand on the wireless router. Use
a professional grade router and position it carefully to ensure good wireless
signal strength at all the device locations.
Principles:
OneMix connects via Wi-Fi to the iLive MixRack and controls the chosen Aux
using a ‘virtual surface’ assigned on the iPad.
The User Logon screen shows User Profiles available within the iLive being
connected to. A password will need to be entered if set in the iLive profile.
Logging on as ‘Admin’ allows access to OneMix setup. Logging on as any
other profile disables access to OneMix layer setup (typical logon for the
musician).
The Admin user configures the OneMix session by choosing the Aux mix,
assigning the layout and setting the OneMix session name.