Allen&Heath iDR0 - Manual (Page 5)

iDR0 User Guide 5
Introduction
This is the user guide for the Allen & Heath iDR0 ‘MiniRack’ mix engine. We recommend
that you read this fully before starting. Included is information on installing, connecting
and operating the unit along with panel drawings, application drawings and technical
specification. Whilst we believe the information in this guide to be reliable we do not
assume responsibility for inaccuracies. We also reserve the right to make changes in the
interest of further product development.
We are able to offer further product support through our worldwide network of approved
dealers and service agents. You can also access our Web site (www.allen-heath.com)
for information on our company and its pedigree, our full product range and our design
philosophy. To help us provide the most efficient service please keep a record of your
unit serial number, and date and place of purchase to be quoted in any communication
regarding this product. The serial number is located on the rear panel.
The iDR0 is one of many components that can connect together to create an iLive
mixing system. For further information on configuring and using iLive please refer to:
iLive System Reference guide AP6526
iDR0 Getting Started Guide AP7284
iLive Getting Started Guide AP7260
Allen & Heath Resource CD AP4742
Allen & Heath web site www.allen-heath.com
Firmware Release Notes Downloadable from web site
Help file within system firmware
Check the packing contents
Retain the product packing should you need to ship the product in future. You should find the
following components:
1x iDR0 MiniRack. This is packed with its rubber feet
fitted. The feet can be removed for rack mounting.
1x IEC MAINS LEAD with moulded plug. Check that the
plug is suitable for connection to your local mains
supply.
iDR0/n
Where n = mains voltage 120 (USA), 220 (EU), 240 (UK)
1x CAT5 CABLE 1.8m RJ45 Ethercon connections.
Part number AH7001. Connects the iDR0 to the iLive
Surface or another MixRack. Note that the second cable
required is shipped with the iLive Surface.
DOCUMENTATION including the User Guide AP7129,
Getting Started Guide AP7284, Safety Sheet AP3345,
Registration Card AP3594, and sticker AP4943.