Allen&Heath Xone S6 - Manual (Page 4)

4 XONE:S6 User Guide
Note: The XONE:V6 all-valve option must not be fitted to the XONE:S6. The valve option is
not available for the XONE:S6. The Allen & Heath MPS7 power unit provided with the console
should be used only to power the XONE:S6 Console.
Important Note on Mains Voltage Setting
The power unit is configured to operate at a mains voltage appropriate for the territory to which
it is supplied. Check that your unit is correctly set to work with your local mains voltage. This
is marked on the power unit rear panel. The setting cannot be changed by the user. Refer this
work to your service agent.
Important Mains Plug Wiring Instructions
The console is supplied with a moulded mains plug fitted to the AC mains power lead. Follow
the instructions below if the mains plug has to be replaced.
The wire which is coloured Green/Yellow or Green must be connected to the terminal in the
plug which is marked with the letter E or with the Earth symbol.
This appliance must be earthed.
The wire which is coloured Blue or White must be connected to the terminal in the plug which
is marked with the letter N.
The wire which is coloured Brown or Black must be connected to the terminal in the plug which
is marked with the letter L.
Ensure that these colour codes are followed carefully in the event of the plug being changed.