Allen&Heath Xone S6 - Manual (Page 20)

20 XONE:S6 User Guide
THIS POWER SUPPLY SHOULD BE USED ONLY WITH AN ALLEN & HEATH XONE:S6 CONSOLE
CAUTION
DC POWER
PIN 3. A GND PIN 2. +30V 1A
PIN 1. +6.3V 0.5A
PIN 5. D GND PIN 4. A GND
PIN 6. +12V 0.5A PIN 7. -30V 1A
Check mains voltage setting
air flow
MADE IN ENGLAND BY ALLEN & HEATH Ltd. ~120W MAX
FUSE
MAINS INPUT
S/No
250V
T
T2.5AL
50-60 Hz 240 V AC
This way up
100mm (4")
Minimum
DC lead
Mains lead
6x
mounting screws
FUSE
ALLEN HEATH &
LINEAR PSU
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
WITH SAME TYPE AND RATING. DISCONNECT SUPPLY BEFORE CHANGING FUSE.
COUPER L'ALIMENTATION AVANT DE CHANGER LE FUSIBLE. ATTENTION: REMPLACER PAR UN FUSIBLE STRICTEMENT IDENTIQUE EN VALEURS
DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK THIS APPARATUS MUST BE EARTHED BY THE POWER CORD. DO NOT OPEN. NO USER SERVICEABLE PARTS INSIDE. DO NOT OBSTRUCT VENTILATION OPENINGS.
CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE REPLACE FUSE
The Allen & Heath Xone:S6 MPS7 power unit should be used only to power a Xone:S6 Console