Allen&Heath Xone V6 - Manual (Page 4)

4 XONE:V6 User Guide
Important Note on Mains Voltage Setting
The power unit has two mains voltage settings. Check that your unit is correctly set to work
with your local mains voltage. This is marked on the power unit rear panel. The setting cannot
be changed by the user. Refer this work to your service agent.
115V to 230V AC auto-sensing (most of the world)
100V AC fixed (Japan)
Important Mains Plug Wiring Instructions
The console is supplied with a moulded mains plug fitted to the AC mains power lead. Follow
the instructions below if the mains plug has to be replaced.
The wire which is coloured Green/Yellow or Green must be connected to the terminal in the
plug which is marked with the letter E or with the Earth symbol.
This appliance must be earthed.
The wire which is coloured Blue or White must be connected to the terminal in the plug which
is marked with the letter N.
The wire which is coloured Brown or Black must be connected to the terminal in the plug which
is marked with the letter L.
Ensure that these colour codes are followed carefully in the event of the plug being changed.