Allen&Heath Xone V6 - Manual (Page 31)

XONE:V6 User Guide 31
JP3
JP2
JP1
JP8
JP4
JP7
JP6
JP5
JP10
JP9
+10, +6, 0dB GAIN RIAA / LINE
INPUT PCB
Input Channel Option Jumpers
Plug on jumpers set the options required. Plug across the two pins to
set. Plug on to just one pin to remove. This keeps the jumper
available to be re-used later in the future if needed.
RIAA disable CH1-4. For RIAA gain and equalisation JP2, JP3,
JP4 and JP8 are fitted. This is the factory default setting. To disable
RIAA and use these inputs with line sources, remove those jumpers
and fit JP1 and JP7 instead.
Gain setting CH1-6. The maximum preamp gain avaiable is set
using these jumpers. For +10dB gain all four jumpers JP5, JP6, JP9
and JP10 are fitted. This is the factory default setting. To change this
to +6dB gain fit JP5 and JP9 only. For 0dB gain remove all four
jumpers.
JP3
JP1
JP2
JP8
JP7
JP4
JP3
JP1
JP2
JP8
JP7
JP4
+10dB
+6dB
0dB
RIAA LINE
JP5
JP6
JP9
GAIN
JP10
JP5
JP6
JP9
JP10
JP5
JP6
JP9
JP10