AirLive WP-201G V2 - Manual (Page 76)

8.4.4 SMB
You can enable/disable the SMB protocol from here. If SMB is enabled, enter the “SMB Group Name” to
specify the SMB group that this print server belongs to. All PCs should join the same group before they can
use this print server by SMB protocol. Furthermore you can enable “Pass Job When Error Occurred” function
and enter name length 1-60 seconds in “Waiting time to pass job”.
8.4.5 SNMP
The print server supports SNMP configuration. If it is enabled, please set up the following parameters.
SNMP System Contact: You can enter the print server administrator’s contact information here. This
information will be displayed in the SNMP management tool.
SNMP System Location: You can enter the installed location of the print server here. This information will be
displayed in the SNMP management tool.
AirLive WP-201G v2 User’s Manual
68