AirLive WP-201G V2 - Manual (Page 16)

AirLive WP-201G v2 User’s Manual
8
Chapter 2: Hardware Installation
1. Unpack the print server package and verify that all the items listed in Section 1.2 are provided.
2. Connect the print server to the printer you want to share on the network.
3. Connect the print server to your network by attaching the network cable to the UTP port of the print server.
4. Connect the power adapter to the print server. The print server will perform the Power-On-Self-Test
(POST) after it is powered on. During POST, the Status LED will be on. When the LEDs are unlighted, the
print server is ready.
Note: The print server MUST use the power adapter that came with the package. Do NOT use any
other power adapter from any other sources.
Note: To prevent any compatibility problems between the print server and other printers, it is
recommended that you power on the print server before the printer.