AirLive WP-201G V2 - Manual (Page 39)

AirLive WP-201G v2 User’s Manual
31
5.2 NetWare 3.x/4.x/5.x Installation & Setup
Once your print server is connected to your Ethernet network, you can set it up for use with your networking
software.
5.2.1 Installation Using PCONSOLE
5.2.1.1 Configuring as Print Server Mode
1. Run the NetWare PCONSOLE program.
2. Change the current file server, if necessary, using the Change Current File Server menu selection.
3. Choose the Print Queue Information menu selection.
4. Press the Insert Key to add a new print queue.
5. Type in a print queue name, such as “PQ” or “Q1”.
6. You have new successfully created the print queue that your print server will serve. Press the Esc key
until the Available Options main menu is displayed.
7. Select Print Server Information
8. Press the Insert Key to add a new NetWare print server object. The print server name can be identical to
the PSxxxxxx name printed on the label of the print server.