AirLive WN-220R - Manual (Page 77)

Appendix: FAQ and Troubleshooting
73 AirLive WN-220R User’s Manual
Appendix: FAQ and Troubleshooting
What can I do when I have some trouble at the first time?
1. Why can I not configure the router even if the cable is plugged in the ports of
Router and the led is also light?
A: First, make sure that which port is plugged. If the cable is in the WAN port, please
change to plug in LAN port 1 or LAN port 4:
Then, please check if the Pc gets ip address from Router. Use command mode as below:
If yes, please execute Browser, like Mozilla and key 192.168.123.254 in address.
If not, please ipconfig /release, then ipconfig /renew.
Whatever I setup, the pc can not get IP. Please check Status Led and refer to the Q2.