AirLive WN-220R - Manual (Page 31)

3. Making Configuration
27 AirLive WN-220R User’s Manual
Connection Control:
There are 3 modes to select:
¾
Connect-on-demand:
The device will link up with ISP when the clients send outgoing packets.
¾
Auto-Reconnect(Always-on):
The device will link with ISP until the connection is established.
¾
Manually :
The device will not make the link until someone clicks the connect-button in the
Status-page.
z
Virtual Computers(Only for Static and dynamic IP address Wan type)
Virtual Computer enables you to use the original NAT feature, and allows you to setup the
one-to-one mapping of multiple global IP address and local IP address.
¾
Global IP: Enter the global IP address assigned by your ISP.
¾ Local IP: Enter the local IP address of your LAN PC corresponding to the global IP
address.
¾ Enable: Check this item to enable the Virtual Computer feature.