AirLive WN-220R - Manual (Page 67)

3. Making Configuration
63 AirLive WN-220R User’s Manual
3.3.4.4 SNMP
In brief, SNMP, the Simple Network Management Protocol, is a protocol designed to give
a user the capability to remotely manage a computer network by polling and setting
terminal values and monitoring network events.
z
Enable SNMP
You must check Local, Remote or both to enable SNMP function. If Local is checked, this
device will response request from LAN. If Remote is checked, this device will response
request from WAN.
z
Get Community
Setting the community of GetRequest your device will response.
z
Set Community
Setting the community of SetRequest your device will accept.
IP 1, IP 2, IP 3, IP 4
Input your SNMP Management PC’s IP here. User has to configure to where this device
should send SNMP Trap message.
z
SNMP Version
Please select proper SNMP Version that your SNMP Management software supports.