AirLive WMM-3000R User Manual

Page 93

AirLive WMM-3000R User

’s Manual

Step3:Please use the exe-file of fw and click as below:

Then click” Upgrade” if necessary, please input password ”admin” .Then reset to default and refer to

Q1 How to connect Router.

However, if those methods can not make the router normal, please send the unit to the seller to check,

thanks.

Why

can I not connect Internet even though the cables are plugged in Wan port

and Lan port and the leds are blink. In addition, Status led is also normal and I

can configure web management?

A: Make sure that the network cable from DSL or Cable modem is plugged in Wan port of Router and

that the network cable from Lan port of router is plugged in Ethernet adapter. Then, please check which

wan type you use. If you are not sure, please call the isp. Then please go to this page to input the

information isp is assigned.