AirLive WMM-3000R - Manual (Page 90)

AirLive WMM-3000R User ’s Manual 87
Appendix E FAQ and Troubleshooting
What can I do when I have some trouble at the first time?
1. Why can I not configure the router even if the cable is plugged in the ports of Router and the
led is also light?
A: First, make sure that which port is plugged. If the cable is in the Wan port, please change to plug in
Lan port 1 or Lan port 4:
Then, please check if the Pc gets ip address from Router. Use command mode as below:
If yes, please execute Browser, like Mozilla and key 192.168.1.254 in address.
If not, please ipconfig /release, then ipconfig /renew.