AirLive WLA-5000AP v3 - Manual (Page 34)

AirLive WLA-5000AP v3 Firmware 2.x User’s Manual
28
waiting to be received by them. The DTIM interval specifies how often the beacon frame should contain
DTIMs. It should have a value between 1 to 255, with a default value of 3.
User Limitation: The range of user limitation is from 1 to 100.
Age Out Timer: Set the age out time. The default is 300 sec.
Transmit Power: Transmit power output depends upon the size and RF characteristics because that will
determine the number of APs, channels, and need for antennas.
Ack TimeOut (11a)/ (11g)/: The "ACK time-out" determines how long the program waits after receiving a
packet from a file stream to determine that stream to be a complete file. For details, please go to Section
3.9.
Enable Radio eXtended Range: Select the check box to enable the Atheros’s eXtended Range(XR)
technology to extend the wireless coverage range.
Enable privacy separator: Select the check box to prohibit data transmission between client stations.
Enable WDS: Select the check box to enable WDS (Wireless Distribution System).
Enable 802.11d: Select the check box to enable 802.11d. 802.11d is a standard for use in countries where
systems using other standards in the 802.11 family are not allowed to operate.
3.3.2 SSID Settings
Advanced Settings >> SSID Settings
SSID, a name for an access point (or a network), differentiates one WLAN from another. All devices in a same