AirLive WLA-5000AP v3 - Manual (Page 17)

AirLive WLA-5000AP v3 Firmware 2.x User’s Manual
11
If you are logging on for the first time, you should use the factory default setting “airlive”. The password is
always displayed as a string of wildcards or dots. Click the LOG ON button to start the configuration session.
3.1 Setup wizard
The Setup Wizard will guide you through a series of configuration screens to set up the basic functionality of
the device. Every time you modify the settings, remember to click APPLY button to save the changes.
3.1.1 TIME SETTINGS
Setup Wizard>>Time Settings
After logging on, the Time Settings page appears. The device time is automatically set to the local time of the
management PC at the first time a connection is made. To modify the device’s time, modify the appropriate
fields, then click APPLY.