AirLive WLA-5000AP v3 - Manual (Page 30)

AirLive WLA-5000AP v3 Firmware 2.x User’s Manual
24
You can define trap managers in the system.
You can add a trap manager by entering a name, an IP address, followed by pressing the ADD button.
You can delete a trap manager by selecting the corresponding entry and press the DELETE SELECTED
button.
To enable a trap manager, check the Enable box in the corresponding entry; to disable it, un-check the
Enable box.
3.2.4 MAC FILTERING SETTINGS
Advanced Settings>>Mac Filtering Settings
The WLA-5000AP v3 allows you to define a list of MAC addresses that are allowed or denied to access the
wireless network.
Disable MAC address control list: When selected, no MAC address filtering will be performed.
Enable GRANT address control list: When selected, data traffic from only the specified devices in the table
will be allowed in the network.
Enable DENY address control list: When selected, data traffic from the devices specified in the table will be
denied/discarded by the network.
To add a MAC address into the table, enter a Mnemonic Name and the MAC Address, and then click ADD.
The table lists all configured MAC Filter entries.
To delete entries, check the corresponding Select boxes and then press DELETE SELECTED.