AirLive WL-2600CAM User Manual
Page 64
AirLive WL-2600CAM User’s Manual
63
7.5.1 General
Select On when you use the SMTP function. The common setting options are displayed below. Select Off,
if you do not wish to use the e-Mail (SMTP) function.
Note :
The Setting of general part will be the same as the setting of IP Notification (Please check
“Setting → Basic → Network → IP Notification”)
¾
SMTP server name: Type the SMTP server name up to 64 characters, or the IP address of the
SMTP server.
¾
SMTP Server Port: You can set port number from 1~65535 according to your mail server. The
default value is 25.
z
Security setting: Tick SSL box if the mail server you use has security restriction.
Note:
If you use g-mail as your mail server, you should set 587 as your port number and tick
SSL box.
¾
Authentication: Select the authentication required when you send an email.
z
Off: Select if no authentication is necessary when an email is sent.
z
On: When authentication is necessary an e-mail is sent, select one of the authentication
methods from the followings.