AirLive WL-2600CAM - Manual (Page 45)

AirLive WL-2600CAM User’s Manual 44
6.3.6 IP Notification
When network notify type is set to “ON”, you can send an e-mail notification of the completion of the network
setting.
¾ Notify Type: You can select the notify type among DHCP, Static IP, and PPPoE.
¾ SMTP Server Name: Type the SMTP server name up to 64 characters, or the IP address of the
SMTP server.
¾ SMTP Server Port: You can set port number from 1~65535 according to your mail server. The
default value is 25.
z Security setting: Tick SSL box if the mail server you use has security restriction.
Note:
If you use g-mail as your mail server, you should set 587 as your port number and tick
SSL box.
¾ Authentication: Select the authentication required when you send an email.
z
Off: Select if no authentication is necessary when an email is sent.
z On: When authentication is necessary an e-mail is sent, there are SMPT, POP before SMPT
or both three options.