AirLive WL-1500R - Manual (Page 42)

Clear: Click to erase all fields and enter new information.
IP Filters
The IP filter function enables you to define a minimum and maximum IP address range filter; all IP addresses falling within
the range are not allowed Internet access. The IP filter profiles are listed in the table at the bottom of the page. (Note:
Click anywhere in the item. Once the line is selected, the fields automatically load the item's parameters, which you can
edit.)
Figure 52.
Enable: Click to enable or disable the IP address filter function.
Range Start: Type the minimum address for the IP range. IP addresses falling between this value and the Range End
are not allowed to access the Internet.
Range End: Type the minimum address for the IP range. IP addresses falling between this value and the Range Start are
not allowed to access the Internet.
Add: Click to add the IP range to the table at the bottom of the screen.
Update: Click to update information for the range if you have selected a list item and have made changes.
Delete: Select a list item and click Delete to remove the item from the list.
Clear: Click to erase all fields and enter new information.
AirLive WL-1500R User’s Manual
39