AirLive WL-1500R - Manual (Page 12)

Connect the Router using Wireless LAN
Figure 3. Connecting the WLAN Router
Plug in one end of the RJ45 network cable to the xDSL/Cable Modem.
Plug in the other end of the RJ45 network cable to the Wireless Internet Broadband Router WAN port.
Check the installation
The control LEDs of the Wireless Internet Broadband Router are clearly visible and the status of the network link can be
seen instantly:
With the power source on, once the device is connected to the broadband modem, the Power, CPU, LAN, WLAN and
WAN port link LEDs of the Internet Broadband Router will light up indicating a normal status.
While the WAN is link up to the ADSL/Cable modem, the WAN port’s Link/ACT LED will light up.
While the LAN is link up to the computer system, the LAN port’s Link/ACT LED will light up.
AirLive WL-1500R User’s Manual
9