AirLive WL-1500R - Manual (Page 38)

Advanced
This function enables user to configure advanced wireless functions.
Figure 48.
Beacon Interval: Type the beacon interval in the text box. User can specify a value from 20 to 1000. The default beacon
interval is 100.
RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This value stabilizes data flow. If data flow is
irregular, choose values between 256 and 2346 until data flow is normalized.
Fragmentation Threshold: Type the fragmentation threshold in the text box. If packet transfer error rates are high,
choose values between 1500 and 2346 until packet transfer rates are minimized. (NOTE: set this fragmentation threshold
value may diminish system performance.)
DTIM Interval: Type a DTIM (Delivery Traffic Indication Message) interval in the text box. User can specify a value
between 1 and 255. The default value is 1.
TX Rates: Select one of the wireless communications transfer rates, measured in megabytes per second, based upon the
speed of wireless adapters connected to the WLAN.
AirLive WL-1500R User’s Manual
35