Entering the wan window – AirLive RS-1000 User Manual

Page 68

Text mode
Original mode

６３

WAN

Entering the WAN window

Step 1.

Click WAN under the Address menu to enter the WAN window. The current
setting information, such as the name of the WAN network, IP and Netmask
addresses will show on the screen.

Figure3-9 WAN

Definitions
Name: Name of WAN network address.
IP/Netmask: IP address/Netmask of WAN network.
Configure: Configure the settings of WAN network. Click Modify to change the settings of
WAN network. Click Remove to delete the setting of WAN network.

In the WAN Network window, if one of the members has been added to Policy or LAN

Group, the Configure column will show the message – In Use. In this case you are not
allowed to modify or remove the settings.