AirLive RS-1000 - Manual (Page 137)

１３２
Modifying the Virtual Server configurations
Step 1.
In the Virtual Server window’s service table, locate the name of the service
desired to be modified and click its corresponding Modify option in the Configure
field.
Step 2.
In the Virtual Server Configuration window, enter the new settings.
Step 3.
Click OK to save modifications or click Cancel to discard changes.
Figure9-11 Modify Virtual Server
WAN：Enter the WAN IP address that configured by the virtual server.
Port：Click the pull-down menu and the system will display you the service item port
Service Name：The service names provided by the virtual server.
Server Virtual IP：Enter the internal IP address mapped by the virtual server. Four computer
IP addresses can be set at most.
Click OK to execute the change of the virtual server, or click Cancel to discard changes.
If the destination Network in Policy has set a virtual server, it will not be able to change
or configure this virtual server, you have to remove this configuration of Policy, and then you
can execute the modification or configuration.