Route table, Entering the route table screen, Route table functions – AirLive RS-1000 User Manual

Page 35

Text mode
Original mode

３０

Route Table

In this section, the Administrator can add static routes for the networks.

Entering the Route Table screen

Step 1.

Click System on the left side menu bar, then click Route Table below it. The
Route Table window appears, in which current route settings are shown.

Figure1-25 Route Table

Route Table functions

Interface: Destination network , LAN or WAN 1 networks.

Destination IP: IP address of destination network.

NetMask: Netmask of destination network.

Gateway: Gateway IP address for connecting to destination network.

Configure: Change settings in the route table.