AirLive POE-FSH808AT - Manual (Page 50)

4. Web Management
AirLive POE-FSH808AT User’s Manual 45

Loopback Detection Function: This column allows you to enable or disable
Loopback Detection function.

Auto Wake Up: Once the Loopback Detection function is running, the ports maybe
disabled to avoid the loop. The Auto Wake Up allows you to activate the port after Time
Interval passed.

Wake-Up Time Interval: Select the time interval here.
Click "Submit" to apply the settings.
4.11 Trunk Setting
Port trunk allows multiple links to be bundled together and act as a single physical link for
increased throughput. It provides load balancing, and redundancy of links in a switched
inter-network. Actually, the link does not have an inherent total bandwidth equal to the sum
of its component physical links.
Traffic in a trunk is distributed across an individual link within the trunk in a deterministic
method that called a hash algorithm. The hash algorithm automatically applies load
balancing to the ports in the trunk. A port failure within the trunk group causes the network
traffic to be directed to the remaining ports. Load balancing is maintained whenever a link in
a trunk is lost or returned to service. This switch may use Port ID, Source MAC Address,
Destination MAC Address, or a combination of Source MAC Address and Destination MAC
Address to be the selection for Trunk Hash Algorithm.