2 vlan member – AirLive POE-FSH808AT User Manual
Page 35
4. Web Management
AirLive POE-FSH808AT User’s Manual
30
Don’t care: Don’t care means the outgoing packet of the selected port keep the
original packet received at the source port. This is the default setting when starting
VLAN configuration. You should change to either Add or Remove Tag.
Remove Tag: Remove tag means the 802.1Q tag of the outgoing packet of the
selected port will not be sent. Use this setting for your Network Connections to PCs.
Only packets of the VLAN Group the Port is member of will be sent.
4.6.2 VLAN Member
The ports need to be made member of your VLAN groups. This is for Tag Based and Port
Based VLAN Mode. The screen here looks different whether you run Tag Based or Port
Based Mode.
VLAN Member in Port Based Mode
In Port Based Mode you see a matrix of your 8 Ports. Simply select the port on top screen
you want to configure, click on Read, and then select or deselect the ports that are on the
same VLAN group. In this configuration mode you do not need to worry about defining
VLAN groups and VLAN IDs.