AirLive POE-5010HD - Manual (Page 23)

4. Operating the Network Camera
AirLive POE-5010HD User’s Manual 20
Function Buttons
You can use the function buttons above the window to control the camera’s audio, video,
and zoom functions.
z
: Click to display the live view image of the camera.
z
: Click to stop playing the live view image.
z
: Click to capture and save a still image.
z
: Click to start recording the video of the camera manually.
z : Click to enlarge the image of the camera digitally.
When you click the button, the Pan window and Zoom IN/OUT bar will appear
on the left-top of Live View Window. You can enlarge the video image digitally
by sliding the Zoom IN/OUT bar, and select the area of the image to display
by moving the Pan window.
z
/ : Click to mute/unmute the microphone of the camera. When it is
unmuted, you to receive the on-site sound/voice where the camera is installed.
NOTE The button is available only when the microphone function is
enabled from Setup > Audio/Video/Image > Audio of Web
Configuration.
z
/ : Click to enable/disable the speaker of the camera. When it is
enabled, you can broadcast your sound/voice through the camera.
NOTE The button is available only when the speaker function is enabled
from Setup > Audio/Video/Image > Audio of Web Configuration.