AirLive POE-100HD - Manual (Page 8)

2. Package Contents
AirLive POE-100HD/
POE-100HD-ICR User’s Manual 4
2.1 Connections
LAN
LED
Power
LED
1. RJ45 LAN socket: Connect to PC or Hub/Switch.
LAN
Socket
For connections to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet
port built N-Way protocol can detect or negotiate the transmission speed of the network
automatically. Please use Category 5 cable to connect the Network Camera to a 100Mbps
Fast Ethernet network switch or hub.
In the LAN socket, there are two LEDs embedded:
LAN LED (green color)
This LED will be flashing while network accessing via Ethernet.
Power (orange color)
This LED is used to indicate whether DC power is on or not. In addition, this LED will be
flashing while the wireless accessing of the Camera.
2. RS-485: Connect to a local keyboard controller.
„ DI/ DO: Connect to sensor in and alarm out devices
„ Cable for I/O connectors:
Name Cable Color Function
12VDC Brown/White DC 12V (50mA maximum)
GND Blue/White GND
NC Purple/White Do not connect
NC Gray Do not connect
DI Green/White Digital signal input
DO Orange/White Digital signal output