AirLive POE-100HD User Manual
Page 36
5. Administrating the Device
AirLive POE-100HD/
POE-100HD-ICR User’s Manual
32
White Balance:
Auto: will adjust the white balance automatically.
Hold: will hold the white balance.
Exposure Control:
Auto: will adjust the internal gain automatically.
Hold: will hold the internal gain.
Color Level:
Large value will be colorful.
Brightness:
Large value will brighten camera.
Sharpness:
Large value will sharpen camera.
Contrast:
Large value will contrast camera heavily.
Night Mode:
User can turn Auto or Off of the night mode. This function is very useful under low
illumination environment.
De-Noise:
De-Noise can remove or lower unwanted noise and preserve fine details and edges
.
PTZ Setting
Camera Protocol:
This device can connect to a PTZ camera or speed dome camera and controls them
thru RS485 interface.
Camera Address:
This is the camera ID set in PTZ camera or speed dome camera. Note that please DO
NOT change the default value if unnecessary. If so, user needs to check and set value
properly for both sides.