AirLive POE-100HD - Manual (Page 25)

5. Administrating the Device
AirLive POE-100HD
/POE-100HD-ICR User’s Manual
21
5.1.1 Network
This section provides the menu for connecting the device through Ethernet cable.
Network
MAC address:
Displays the Ethernet MAC address of the device. Note that user can not change it.
Obtain an IP address automatically (DHCP):
DHCP: Stands for Dynamic Host Configuration Protocol.
Enable this checked box when a DHCP server is installed on the network to issue IP
address assignment. With this setting, the IP address is assigned automatically. If this
device can not get an IP address within limited tries, the device will assign a default IP
address, 192.168.0.100, by itself as the default IP address.
IP address, Subnet mask, and Gateway:
If you do not select Obtain an IP address automatically, then you need to enter these
network parameters manually.