5 ip binding – AirLive IGR-2500 User Manual

Page 54

3.11.5 IP Binding

In Internet world, there have some Game Server, SSL protocol user or Personal Server have special request

for connection, these special request include:

Use special port number to perform specific function

Not allow user connect with multiple WAN IP address

For Example, if user uses load Balance function provided by router to connect Server, Server might respond

with many login requests back to user, because each session comes different WAN port with different IP

address, Server treats it like different request

When user enables IP Binding function, he can specify the IP packet with dedicated WAN port to reach

dedicated destination server, so it will show only 1 IP address.

That means when user wants to reach destination server, the packet will only go through dedicated WAN port,

so load balance function will not be available.

Remote IP:

Destination server IP address. It will be restrict the access via dedicated WAN port. If you do

not specify destination Host IP address in this field, the specific port number in the port number field will

be limited to transfer packet via dedicated WAN port.

Start Port / End Port:

The protocol port number starts from 0 to 65535, you can decide the port number

range to be restricted.

Start Port / End Port: 0 –

all packet will be restricted to dedicated WAN port

Start Port / End Port: blank –

all packet will be restricted to dedicated WAN port

Start Port / End Port: 80 –

only packet type of port 80 will be restricted, the rest type packets

will not be restricted, and can be spread out with Load Balance function.

Start Port / End Port: 1 ~ 21 –

only packet type from port 1 to port 21 will be restricted, the

rest type packets will not be restricted, and can be spread out with load balance function.

WAN:

select WAN port for transferring the dedicated destination packet

Example:

IP Address Start port

End Port WAN

210.3.1.23 0 65535 WAN1

All packets go to Internet Host with IP 210.3.1.23 will be restricted to dedicated WAN 1

IP Address Start port

End Port WAN

210.3.1.24 23 23 WAN2

Packet type belong to protocol 23 that goes to Internet Host with IP 210.3.1.24 will be restricted to dedicated

WAN2