AirLive IGR-2500 - Manual (Page 18)

„ WAN Link Mode: You can choose the WAN interface type in order to follow the connecting type of ISP.
‹ Auto Sense
‹ 10Mbps Half Duplex
‹ 10Mbps Full Duplex
‹ 100Mbps Half Duplex
‹ 100Mbps Full Duplex
3.3.1 WAN Type – Dynamic IP
Usually it's used to connect CABLE modem. You won't need to assign IP address, and the IGR-2500 will get
the IP address from ISP automatically. (Figure 3-7)
When you choose Dynamic IP, you only need to save this selection, and reboot router when you finish
configuring all parameter.
Figure 3-7 Dynamic IP
15