AirLive GW-300NAS User Manual
Page 63
3. Making Configuration
AirLive GW-300NAS User’s Manual
59
iscellaneous
M
AC Address for Wake-on-LAN: It enables you to power up a networked device remotely. If
or instance if the MAC address is 00-11-22-33-44-55, enter it into the blank of MAC Address
omain Name or IP address for Ping Test: Allow you to configure an IP, and ping the device.
fterwards, click on “Save” to store your settings or click “Undo” to give up the changes.
M
you would like to trigger this function, you have to know the MAC address of this device.
F
for Wake-on-LAN. Afterwards. Afterwards, click "Wake up" button which makes the router to
send the wake-up frame to the target device immediately.
D
You can ping a specific IP to test whether it is alive.
A