1 network setup – AirLive GW-300NAS User Manual

Page 22

Text mode
Original mode

3. Making Configuration

AirLive GW-300NAS User’s Manual

3.1.1 Network Setup

There are two ways to configure the network, respectively LAN Setup and Internet setup.

LAN type

LAN IP Address: The local IP address of this device. The computer on your network must
use the LAN IP address of this device as their Default Gateway. You can change it if
necessary.
2. Subnet Mask: Input your Subnet mask. (All devices in the network must have the same
subnet mask.) The default subnet mask is 255.255.255.0.

Internet Setup
1. WAN Interface: Select Ethernet WAN or Wireless WAN to continue.
2. WAN Type: WAN connection type of your ISP. You can click WAN Type combo button to
choose a correct one from the following options:

Ethernet WAN

A. Static IP Address