AirLive GW-300NAS - Manual (Page 50)

3. Making Configuration
AirLive GW-300NAS User’s Manual 46
Connection control: Check "Connection control" to enable the controlling of which wired and
wireless clients can connect with this device. If a client is denied to connect with this device, it
means the client can't access to the Internet either. Choose "allow" or "deny" to allow or deny
the clients, whose MAC addresses are not in the "Control table" (please see below), to connect
with this device.
Association control: Check "Association control" to enable the controlling of
which wireless client can associate to the wireless LAN. If a client is denied to associate to the
wireless LAN, it means the client can't send or receive any data via this device. Choose "allow"
or "deny" to allow or deny the clients, whose MAC addresses are not in the "Control table", to
associate to the wireless LAN.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the changes.
Miscellaneous
Administrator Time-out: The time of no activity to logout automatically, you may set it to zero to
disable this feature.
Remote Administrator Host/Port
In general, only Internet user can browse the built-in web pages to perform administration task.
This feature enables you to perform administration task from remote host. If this feature is
enabled, only the specified IP address can perform remote administration. If the specified IP
address is 0.0.0.0, any host can connect with this product to perform administration task. You
can use subnet mask bits "/nn" notation to specified a group of trusted IP addresses for
example, "10.1.2.0/24".
NOTE: When Remote Administration is enabled, the web server port will be shifted to 80. You
can change web server port to other port, too.
Discard PING from WAN side: When this feature is enabled, any host on the WAN cannot ping
this product.