Chapter 1: introduction, 1 features – AirLive Ether-FSH2422W User Manual
Page 7

AirLive Ether-FSH2422W User’s Manual
1
Chapter 1: Introduction
The Ether-FSH2422W is a multi-port Switch that can be used to build high-performance switched
workgroup networks. This switch is a store-and-forward device that offers low latency for high-speed
networking. The switch is targeted at workgroup, department or backbone computing environment.
The Ether-FSH2422W has 24 auto-sensing 10/100Base-TX RJ-45 ports and 2 auto-detect Gigabit
combo ports for higher connection speed. This switch features a store-and-forward switching scheme.
This allows the switch to auto-learn and store source address in a 4K-entry MAC address table.
1-1 Features
Conforms to IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T,
IEEE802.3z Gigabit fiber, IEEE802.3x Flow control and Back pressure, IEEE 802.3ad Port
Trunk, IEEE 802.1p Class of Service.
24 10/100 TX plus 2 10/100/1000/Mini-GBIC Combo
Automatic MDI/MDIX supported
High Switch Fabric up to 8.8Gbps
N-way Auto-Negotiation supported
Store-and-Forwarding Switching Architecture
4K-entry MAC address table
Non-Blocking full wire speed architecture
IEEE 802.3x Flow control:
¾
Pause-frame for full duplex mode
¾
Back-pressure for half duplex mode
Fan free design