AirLive CU-720PIR - Manual (Page 13)

2. Getting Started
AirLive CU-720PIR User’s Manual 8
2
2.
Getting Started
Once you have installed the Network Camera well and powered it on, the network
accessing type LED will turn on. It means the system is booting up successfully.
Furthermore, if you have a proper network connection, and access to the Network Camera,
the LED will flash green under wired mode or orange under wireless mode.
When you install the Camera on a LAN environment, you have two easy ways to search
your Cameras by IPWizard II or UPnP™ discovery.
2.1 IP Wizard
Here is the way to execute IPWizard II to discover Camera’s IP address and set up related
parameter in a Camera.
When launch the IPWizard II, a searching window will pop up. IPWizard II is starting to
search Network Cameras on the LAN. The existed devices will be listed as below.