AirLive ARM-204 - Manual (Page 53)

49
z IP Filter Set Editing
Parameter Description
IP Filter Set Index This is the item number to record the setting.
Interface Select which channel (PVC) to configure.
Direction Select the access to the Internet (Outgoing) or from the
Internet (Incoming), or Both.
z IP Filter Rule Editing
Parameter Description
IP Filter Rule Index This is the item number to record the setting rule.
Active Select “Yes” to enable the current rule, select “No” to
cancel the current rule.
Source IP Address Enter the start IP Address which will be monitored.
Subnet Mask Enter the Subnet Mask based on the Source IP Address.
Port Number LAN users use port numbers to distinguish one network
application over another such as 21 is for FTP service.
The port number range is from 0 to 65535. It is
recommended that this option be configured by an
advanced user.
Destination IP Address Enter the start IP Address which will be monitored.
Subnet Mask Enter the Subnet Mask based on the Destination IP
Address.