AirLive ARM-204 User Manual

Page 23

Windows NT

1. Click

the

Start button and select Settings, then click Control Panel. The

Control Panel window will appear.

2. Double-click

Network icon. The Network window will appear. Select the

Protocol tab from the Network window.

3. Check

the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is

not installed, click the Add button to install it now. If TCP/IP is installed, go to

step 5.

4. In

the

Select Network Protocol window, select the TCP/IP Protocol and click

the Ok button to start installing the TCP/IP protocol. You may need your

Windows CD to complete the installation.

5. After you install TCP/IP, go back to the Network window. Select TCP/IP from

the list of Network Protocols and then click the Properties button.