AirLive ARM-204 - Manual (Page 15)

11
8. Click “Save” to save the settings and reboot the router.
9. After saving and rebooting the router, the ISP settings are all finished. This
wizard will then help to set your computer to obtain IP Address from the router
automatically.
Note1: Using the router to get into the Internet, the IP Address of each
PC has to be set in the same subnet as the router. This wizard will help
to set the proper IP Address to your computer.
Note2: By default, the router’s DHCP Server is enabled. If it is disabled
before running the wizard, the wizard will enable the DHCP Server of the
router automatically.