AirLive ARM-204 - Manual (Page 45)

41
z Add Route
If you have another router with a LAN-to-LAN connection, you may need to
create a static routing on the router that is the gateway to Internet.
Parameter Description
Destination IP Address Enter the IP Address of the destination LAN.
IP Subnet Mask Enter the Subnet Mask address of the destination LAN.
Gateway IP Address This is the gateway IP Address where packets are sent.
Metric The number of hops (routers) to pass through to reach
the destination LAN. It must be between 1 and 15.
Announced in RIP Select “Yes”, this routing path will be propagated to other
hosts through RIP broadcasts. Select “No”, this routing
path will be kept private and it is not included in RIP
broadcasts.