AirLive ARM-201E - Manual (Page 31)

ATM QoS: Select the Quality of Service types for this Virtual Circuit. The ATM QoS types include
CBR(Constant Bit Rate), VBR(Variable Bit Rate) and UBR (Unspecified Bit Rate). These QoS types are all
controlled by the parameters specified below, including PCR, SCR, and MBS.
PCR: Peak Cell Rate.
SCR: Sustained Cell Rate.
MBS: Maximum Burst Size.
[Encapsulation]
Dynamic IP: Select this option if your ISP provides you an IP address automatically. This option is typically
used for Cable services. Please enter the Dynamic IP information accordingly.
Static IP: Select this option to set static IP information. You will need to enter in the encapsulation type (1483
Bridged IP LLC, 1483 Bridged IP VC-Mux, 1483 Routed IP LLC (IPoA), 1483 Routed IP VC-Mux), IP address,
subnet mask, and gateway address provided to you by your ISP. Each IP address entered in the fields must
be in the appropriate IP form, which is 4 IP octets separated by a dot (x.x.x.x). The Router will not accept the
IP address if it is not in this format.
30
AirLive ARM-201E / 204E User’s Manual