Chapter 3: connecting adsl2+ router via ethernet, 1 setup adsl2+ router via ethernet cable, 2 configure tcp/ip – AirLive ARM-201E User Manual
Page 11: Etup, Adsl2, Router via, Thernet, Able, Onfigure, Tcp/ip
Chapter 3: Connecting ADSL2+ Router via
Ethernet
You can connect ADSL2+ router with PC through either Ethernet cable. After connection is
established, you can configure the host PC to be a DHCP client. You have to repeat the same steps for every
host PC on your network if you use DHCP function on your router.
3.1 Setup ADSL2+ router via Ethernet Cable
If there is an available LAN card present on your PC, you just simply connect ADSL router and PC
through the Ethernet cable. Once you establish Internet connection, you could browse the Web through the
Ethernet cable.
3.2 Configure TCP/IP
For Windows 98SE and ME
Step 1:
Click Start then Settings and choose Control Panel
Step 2:
Double click Network icon.
Step 3:
Select Configuration tab, then choose TCP/IP from the list of installed network
Components and click Properties button.
Step 4:
You can setup the following configurations in two methods:
10
AirLive ARM-201E / 204E User’s Manual